(PLC) Main/Base Unit
A compact Programmable Logic Controller (PLC) Main Base Unit .
Select from our range of products from different brands
(PLC) Main/Base Unit
A compact Programmable Logic Controller (PLC) Main Base Unit .
ANALOG INPUT
A Siemens SIMATIC S7-300 isolated analog input module.
ANALOG OUTPUT SM 332
OPTICALLY ISOLATED, 4 AO, U/I;. DIAGNOSTICS;. RESOLUTION 11/12 BITS, 20 PIN,. REMOVE/INSERT W. ACTIVE, BACKPLANE BUS
Analog Input Module
High-speed, 2-channel analog input module designed for the Siemens SIMATIC ET 200S distributed I/O system.
Analog Input Module
A versatile, optically isolated analog input card for the Siemens S7-300 Programmable Logic Controller (PLC) system.
Backup battery
A 3.6V / 2.3Ah lithium backup battery used for SIMATIC S7-400 programmable logic controllers (PLCs).
COMPACT CPU
SIMATIC S7-300 compact CPU (CPU 313C-2 DP) used in industrial automation
CONTROL UNIT
A SINAMICS G120 Control Unit (Model: CU240E-2 DP) designed to control and monitor modular inverter drives.
A Siemens central processing unit (CPU 1517-3 PN/DP) from the SIMATIC S7-1500 automation series.
CPU 312
CPU 312 Central processing unit with MPI, Integr. power supply 24 V DC, Work memory 32 KB, Micro Memory Card required.
CPU Unit
A compact all-in-one Programmable Logic Controller (PLC) CPU unit from Omron's SYSMAC CP1H series.
CPU Unit
An all-in-one, standard-performance Programmable Logic Controller (PLC) CPU base unit.
Central Processing Unit
A legacy SIMATIC S7-300 CPU 314 Central Processing Unit designed for industrial automation control systems.
Central processing unit
(CPU 416-2) from the SIMATIC S7-400 series. Designed for data-intensive, complex industrial automation tasks.
Communications Processor
(CP 343-1 Advanced) designed to connect SIMATIC S7-300 PLCs to Industrial Ethernet and PROFINET networks.
Connection plug
SIMATIC DP PROFIBUS bus connector designed to connect PROFIBUS nodes or stations to a PROFIBUS communication cable.
Counter modules
4 channels counter modules - 40 kHz - 36 mA at 24 V DC, 330 mA at 5 V DC.
DC Digital Input Module
A digital input module for the MELSEC-Q Series programmable logic controller (PLC).
DC power cable to connect
Power cable to connect the digital I/O simulator board to DVP-PS01. 5.
DOUBLE MOTOR MODULE
SINAMICS S120 Double Motor Module input: 600 V DC output: 400
DP/DP Coupler Coupling Module
It is a hardware coupling module used to connect two independent PROFIBUS DP networks,
Decoder Module
A technology/position decoder module for the SIMATIC S7-300 PLC family.
Delta SCADA Software
Delta SCADA Software DIAV, INDUSTRY AUTOMATION VIEW SCADA 1
Digital DC Input Module
High-density, 32-point DC digital input module used in the SYSMAC C200H programmable logic controller (PLC) series.
Digital I/O Expansion Module
Siemens SIMATIC S7-200 CN digital expansion module (EM 223).
Digital Input Expansion Module
This module is a digital input expansion module for the SIMATIC S7-300 series of Programmable Logic Controllers (PLCs).
Digital Output Module
It is designed to control high-voltage AC devices (such as contactors and solenoids) in industrial automation systems.
Digital Output Module
A standard expansion module designed for the Siemens SIMATIC S7-300 Programmable Logic Controller (PLC) series.
Digital Output Module
SIMATIC S7-300 Digital Output Module (SM 322) 32 isolated digital outputs
Digital Output Module
A standard (ST) digital output module for the Siemens SIMATIC S7-1500 series.
Digital Output Module.
An expansion module for the Siemens SIMATIC S7-200 series Programmable Logic Controller (PLC).
Digital Transistor Output Module
A digital transistor output module by Mitsubishi Electric designed for the MELSEC-Q Series of (PLCs)
Digital input/output extension modules
Programmable Logic Controller (PLC) series have a high degree of reliability and high speed performance
Direct-display control panel
Multi-function power meter and direct-display control panel.
Discontinued Modicon Premium discrete output module
Discontinued Modicon Premium discrete output module
Double format PL7 processor
Modicon Premium, Internal RAM 96Kwords program & data, EtherNet TCP/IP, PL7 Junior/Pro
EXTENSION MODULE
A decentralized I/O extension module used in industrial automation .
Electronic Module
A SIMATIC DP electronics module designed for the ET 200S distributed I/O system.
Electronic Module
An analog electronic module for the SIMATIC ET 200S distributed I/O system.
Enclosed AC/DC switching power supplies
150W, single-output AC-DC switching power supply
DD0203 D200/FR1A 110-240VAC 24VDC
Evaluation Unit
An evaluation unit or speed monitoring module.
I/O Expansion Module
A Siemens SIMATIC S7-200 CN Digital I/O EM 223 expansion module.
I/O Module
A combination I/O module manufactured by B&R Industrial Automation for their System 2003 PLC series.
INPUT MODULE
Fail-safe digital input module for the SIMATIC ET 200SP system.
IO-Module
A bundle package for the Siemens SIMATIC S7-300 automation system.
Input Module
A discontinued discrete input module from the Schneider Electric Modicon Premium automation platform.
Interface Module
S7-1500, ET 200MP. IM 155-5 DP ST Interface module for max. 12 S7-1500 modules, including PROFIBUS connection plug.
Logic module
It is used in building automation and small industrial applications to control lighting, heating, ventilation, and access systems
Master/local module
CC-Link IE Field Network master/local module for the MELSEC-Q series Programmable Logic Controllers (PLCs) .
Optical Link module
SIMATIC NET, PROFIBUS OLM/G12 V3.1 OPTICAL LINK MODULE
Output Expansion Module
Mitsubishi Electric output expansion module for the MELSEC-F (FX) series programmable logic controllers (PLCs).
Output Module
32-point transistor digital output module from Mitsubishi's MELSEC-Q series of Programmable Logic Controllers (PLCs).
Output Module
Omron SYSMAC CJ-series programmable logic controller (PLC) digital expansion module.
Output Module
A digital output module designed for the SIMATIC S7-300 automation system.
PLC Module
An IP65-rated AS-Interface (AS-i) pneumatic application module used in industrial automation.
PLC Q Series iQ CPU
PLC Q Series iQ CPU module;4096 EA;1.9 ns/log. Com.;60k steps;Ethernet;USB;SD
POWER MODULE
SINAMICS PM240-2 Power Module designed for modular AC drives.
PROFIBUS Optical Link Module.
A PROFIBUS Optical Link Module. It is designed to bridge RS-485 networks with glass fiber optic cables over large distances.
Power Module
Power Module with integrated filter class A with integrated braking chopper 380-480 V 3 AC +10/-10% 47-63 Hz power high
Power Module
A 24V DC power module designed for the SIMATIC ET 200S distributed I/O system.
Programmable Logic Controller (PLC) CPU
SIMATIC S7-300 CPU 313C Compact CPU.
Programmable logic controller (PLC)
A Micro Logix 1100 series programmable controller (PLC).
Rechargeable Ni-MH battery.
3.6V, 2000mAh (or 2100mAh) rechargeable Ni-MH battery.
Serial Communication Module
Serial communication module for the Mitsubishi MELSEC-Q series programmable logic controllers (PLCs).
Server Module
SIMATIC ET 200SP, spare part Server module for ET 200SP
power cable to the appropriate terminals
power cable to the appropriate terminals
(PLC) CPU Module
A Universal Model Q Series Programmable Logic Controller (PLC) CPU module manufactured by Mitsubishi Electric.
(PLC) CPU Unit
Third-generation, compact Programmable Logic Controller (PLC) base unit.
5-color multi-function LED dome indicator light
EZ-LIGHT K50 series, used for industrial automation and signaling
AC Servo Drive
A high-performance 2 kW AC servo drive manufactured by Delta Electronics.
AO Current Module
Analog output module for the SIMATIC ET 200S distributed I/O system, used to output current signals in industrial automation.
AS-Interface addressing unit
Addressing and diagnostic tool used to commission, program, and troubleshoot automated industrial networks.
AS-Interface distributor compact
The Siemens 3RK1901-1NN10 is an AS-Interface (AS-i) compact distributor used to create network branches and structures with AS-i shaped/flat cables
Aalog Current Output Module
An analog current output module belonging to the POINT I/O family.
Advanced Control Unit
Advanced control unit Ultra, 8A to 32A, 3P motors, protection & diagnostic, class 10, coil 110-240VAC/DC
Advanced Operator Panel
Formally described as an Advanced Operator Panel (AOP).
All-purpose Digital Output Module
An all-purpose digital output module designed for industrial automation.
Analog Combo Expansion Module
An LS Electric (formerly LGIS) XGB series analog combo module.
Analog I/O Module
Allen-Bradley CompactLogix high-speed, 6-point analog combination module.
Analog Input Expansion Module
A specialized expansion module (EM 231) designed to acquire analog voltage signals.
Analog Input Module
Standard Type Multi-Range Analog Input Module for the Fuji Electric MICREX-SX SPH Series programmable logic controllers.
Analog Input Terminal
Analog Input Terminal that features 4 analog inputs and performs internal calculations on analog values within the slave itself.
Analog Input/Output combination module.
Discontinued Siemens SIMATIC S7-300 high-speed analog input/output module.
Analog Output Module
It converts digital PLC commands into precise voltage or current signals to control actuators like drives, valves, and gauges in industrial automation environments
Analog Output Module
An Analog Output Module (AOM) used for position feedback in the SIPART PS2 electropneumatic valve positioner.
Analog Output Signal Module
SIMATIC S7-1200, Analog output, SM 1232, 4 AO, +/-10 V, 14-bit resolution, or 0-20 mA/4-20 mA, 13-bit resolution.
Analog input block
An 8-channel analog input expansion block manufactured by Mitsubishi Electric for the MELSEC-F series.
Analog input module
Installation and wiring instructions for the DVP06AD-S analog input module,
Analog input module
A 16-channel, high-level analog input module from the Modicon Premium automation platform.
Analog input module
A 4-channel analog-to-digital (A/D) input extension module.
Analog output module
Analog output module, Modicon Premium, 4 outputs, 12 bits Coversion, 900mA at 5VDC.
Analog output module
2-point, 12-bit analog output module for Omron's CJ1-series programmable logic controllers (PLCs).
Analog voltage input module
A POINT I/O 2-channel analog voltage input module.
Bus Adapter
A PROFINET bus adapter for the Siemens SIMATIC ET 200SP distributed I/O system.
Bus Connector f. PROFIBUS
Standard product which is a stock item could be returned within the returns guidelines/period.
CENTRAL PROCESSING UNIT
A Central Processing Unit (CPU) module from the SIMATIC S7-400 automation platform.
CNC Hardware Component.
CNC hardware numerical control unit (NCU 720.2) with an integrated PLC (SIMATIC PLC 317-2DP).
CPU 226-CN, AC PS, 24DI DC/16DO Relay
CPU 226-CN, AC PS, 24DI DC/16DO Relay
CPU Module
A Programmable Logic Controller (PLC) CPU module from the SIMATIC S7-200 SMART series.
CPU Units
A SYSMAC CJ-series compact Programmable Logic Controller (PLC) CPU manufactured by Omron.
CPU unit
It is a MELSEC-Q Series Programmable Logic Controller (PLC) CPU unit .
Central Processing Unit (CPU)
High-performance central processing unit (CPU) belonging to the SIMATIC S7-400 series.
Central Processing unit
Central processing unit (CPU) for the Siemens SIMATIC S7-300 automation system.
Central processing unit
CPU WITH MPI INTERFACE INTEGRATED 24 V DC POWER SUPPLY 256 KBYTE WORKING MEMORY 2.
Central processing unit
SIMATIC S7-300, CPU 315-2 PN/DP, Central processing unit with 256 KB work memory.
Central processing unit
SIMATIC S7-300 CPU 317-2DP central processing unit.
Communication Board
A SIMOVERT MASTERDRIVES Communication Module (CBP2).
Communication Processor
Siemens SIMATIC S7-300 communication processor (CP 343-1 Lean).
Communications Adapter
Serial communications adapter manufactured by Omron for their legacy CPM1A and CPM1 series of micro (PLCs).
Communications Processor
SIMATIC NET CP 343-1 Communications Processor.
Communications Processor
SIMATIC NET Communications Processor (CP 343-2) designed for industrial automation.
Communications Processor (CP 342-5)
A Communications Processor (CP 342-5) used to connect the SIMATIC S7-300 PLC (Programmable Logic Controller).
Compact CPU
A discontinued Siemens SIMATIC S7-1200 compact CPU (model CPU 1214C).
ControlLogix
Providing the mechanical mounting and the electrical backplane required to connect and power various modules.
ControlLogix Chassis Specifications
It provides the physical and electrical backbone for a Programmable Logic Controller (PLC) system by housing processors.
ControlLogix Communication Modules
It mounts directly into the ControlLogix chassis to bridge the PLC system with standard industrial Ethernet networks.
ControlLogix Digital I/O Modules
Designed to control industrial field devices like relays, solenoids, and valves.
ControlLogix Digital I/O Modules
ControlLogix System designed to interface standard field input devices (like sensors and push-buttons) with the (PLC).
ControlLogix safety I/O modules
It simplifies maintenance by allowing I/O modules to be replaced without disconnecting wiring.
Controller
A ControlLogix 5580 controller featuring 5 MB of user memory, one USB port, and an embedded 1-gigabit (Gb) Ethernet port.
Converter Module
Industrial automation component manufactured by Mitsubishi Electric. high-precision Digital-Analog (D/A) Converter Module
Counter Unit
A 2-channel High-Speed Counter Unit designed for Omron's CJ-series Programmable Logic Controllers (PLCs).
DC Input Module
A 64-point digital DC input module for the MELSEC-Q Series programmable logic controllers (PLCs).
DC Input Module
A remote DC input module for the CC-Link IE Field Network.
Device Net Analog I/O Terminals
A Device Net Analog Output Unit. It features 2 analog output channels and supports multiple signal ranges.
Digital Expansion Module
SIMATIC S7-200 SMART digital I/O extension module.
Digital I/O EM 223, only for S7-22X CPU
Digital I/O EM 223, only for S7-22X CPU
Digital Input Module
It is a digital input module used in the Siemens SIMATIC S7-300 Programmable Logic Controller (PLC) systems.
Digital Input Module
SIMATIC S7-300, Digital input SM 321, Isolated 32 DI, 24 V DC, 1x 40-pole.
Digital Input Module
A modular actuator and indicator component described as a lampholder with an integrated white LED (24V AC/DC).
Digital Output Electronics Module
A fail-safe digital output electronics module for the SIMATIC DP ET 200S distributed I/O system.
Digital Output Module
A Siemens digital output module for the SIMATIC S7-300 PLC system.
Digital Output Module
A CC-Link IE Field Network block-type remote digital output module by Mitsubishi Electric.
Digital Remote Input Module
A compact MELSEC CC-Link remote input module.
Digital input module
The Siemens 6ES7321-1BH01-0AA0 is a digital input module for the SIMATIC S7-300 automation system
Digital input module
SIMATIC S7-1500 digital input module (DI 16x24 V DC BA).
Digital input module
A digital input electronic module for the SIMATIC ET 200S distributed I/O system.
Digital input module
16-point DC digital input unit for the Omron SYSMAC CJ1 series programmable logic controllers (PLCs).
Digital input module
A 16-point digital input module for the MELSEC-Q series Programmable Logic Controllers (PLCs).
Digital output extension modules
Output Module DIN Rail 100 ~ 240VAC, 24VDC
Digital output unit, 32 x transistor outputs, PNP
Digital output unit, 32 x transistor outputs, PNP
Digital relay contact output module
Digital contact output module designed for the SLC 500 programmable logic controller (PLC) system.
Disconnect switch
3-pole, non-fusible disconnect switch rated for 60A at 600V AC (UL general purpose) and 63A (IEC)
Display and operator unit
Premier display and operator unit designed specifically for use with the Siemens LMV5 Burner Management System
Distributed I/O System
SIMATIC DP electronic module for the ET 200S distributed I/O system.
Double-Format Processor
Double-format processor module from the Modicon Premium automation platform (formerly Telemecanique).
Electric MELSEC-F Series PLC
A compact, all-in-one programmable logic controller (PLC) CPU main unit by Mitsubishi Electric.
Electronic Module
A discontinued Siemens SIMATIC DP electronic module.
Electronic modules for ET 200S
SIMATIC DP, 5 electronic modules for ET 200S, 4 DO standard 24 V DC/0.5 A, 15 mm width, 5 units per packing unit
Electronics Module
A standard module used in Siemens distributed I/O systems to switch loads on and off.
Electronics Module
A fail-safe electronics module for the SIMATIC ET 200S distributed I/O system.
Expansion Module
An analog special function block for Mitsubishi MELSEC-FX series Programmable Logic Controllers (PLCs).
Expansion Module
A safe, configurable semiconductor output module utilized in industrial automation systems.
Expansion Module
An expansion module in the PNOZmulti classic series of configurable safety systems used in industrial automation.
FEEDER & GENERATOR PROTECTION RELAYS
The Fanox SILA000C6E32AD is a highly advanced Overcurrent and Earth Fault Protection Relay designed for primary and secondary medium-voltage distribution systems, compact switchgear, and renewable energy installations
FLEX I/O-XT digital combination module
An extreme-environment FLEX I/O-XT digital combination module.
Gateway Module
A SIMATIC NET network gateway module used to transition networks from PROFIBUS DP to AS-Interface (AS-i).
General-purpose AC drive
The CIMR-VC4A0004BAA is a compact, general-purpose Variable Frequency AC Drive (inverter) manufactured by Yaskawa. It belongs to the Yaskawa V1000 Series, widely used for industrial automation, conveyors, pumps, and fans
INTERFACE MODULE
SIMATIC DP IM 151-3 PN ST (Standard) interface module designed for the SIMATIC ET 200S distributed I/O system
Industrial Ethernet Switch
Ethernet switch, four RJ45 ports, one ST fiber port
Input Expansion Module
A 4-channel analog input expansion module for MELSEC-F series Programmable Logic Controllers (PLCs).
Input Expansion Module
Digital input expansion module for the SIMATIC S7-200 CN series of (PLCs).
Input Module
SIMATIC S7-1500, analog input module AI 8xU/R/RTD/TC HF, 16 bit resolution
Input Module
An 8-channel analog voltage input module for the Mitsubishi Electric MELSEC-Q Series programmable logic controllers (PLCs).
Input and output modules
DC output module designed for use with the SLC 500 Programmable Logic Controller (PLC) systems.
Input extension module
Extension modules simply clip onto MPUs to add many additional functions
Input module
16-point digital input module for MicroLogix 1100, 1200, and 1400 programmable logic controllers
Input/Output Module
It is a combined analog input/output module for the SIMATIC S7-300 programmable logic controller (PLC) system.
Interface Module
A Siemens SIMATIC DP Interface Module (IM 151-1 High Feature).
Compact switched-mode power supply designed to provide reliable 24 V DC output for industrial automation systems
LV AC industrial wall-mounted single drive
LV AC industrial wall-mounted single drive, IEC: Pn 5.5 kW, 12.9 A, 400 V (ACS880-01-12A6-3)
LV431629 Schneider Electric switch-disconnector
This Compact NSX250NA is a complete 3 poles switch disconnector
Line differential protection and control RED615
Line differential protection and control RED615
Lithium Backup Battery
3.0V non-rechargeable lithium backup battery for Mitsubishi MELSEC-Q series PLCs.
Local Network Module
A CC-Link network module designed for the MELSEC-Q Series programmable logic controllers.
Logic controller
Programmable Logic Controller (PLC) from the MicroLogix 1200 family
MASTERDRIVES
Closed-loop and open-loop vector control module (CUVC) used in SIMOVERT MASTERDRIVES industrial motor control system
MASTERDRIVES System
A discontinued interface board for the SIMOVERT MASTERDRIVES system.
MASTERDRIVES Vector Control
The Siemens 6SE7021-0EP60 is a discontinued SIMOVERT MASTERDRIVES Vector Control converter unit. Built in a space-saving Compact PLUS design
MICROMASTER
MICROMASTER 440 AC frequency inverter designed for highly dynamic and complex drive applications
MICROMASTER 420
MICROMASTER 420 without filter 200-240 V 1/3 AC+10/-10% 47-63
MICROMASTER 440
A discontinued variable frequency drive (VFD) from the MICROMASTER 440 series.
MICROMASTER 440 without filter
The Siemens 6SE6440-2UD32-2DA1 is a MICROMASTER 440 series frequency inverter designed for heavy-duty industrial motor control. It operates on 3-phase 380V-480V AC power and delivers a nominal output rating of 22 kW
MICROMASTER 440 without filter
MICROMASTER 440 without filter 380-480 V 3 AC +10/-10% 47-63 Hz constant torque 0.75 kW
Managed IE switch,
Digital input unit, 32 x 24 VDC inputs, MIL40 connector (not included)
Master Drives Rectifier/Regenerating Unit
A built-in SIMOVERT MASTERDRIVES rectifier and regenerative feedback unit
Master/Local Module
Control & Communication Link (CC-Link) System Master/Local Module .
Memory Controller
One built-in serial port and have a key on the front panel so that you can change controller modes
Micro-Programmable Logic Controller.
The DO-05DR-D (or D0-05DR-D) is an Automation Direct DirectLOGIC DL05 PLC micro-programmable logic controller.
Modular
A modular, managed industrial backbone router and Layer 3 switch.
Module
A SIMATIC DP ET 200S electronics module featuring 4 analog inputs for current measurement.
Multi-function Compact Inverter
High-performance, compact AC Variable Frequency Drive (VFD) from the MX2 series.
NX1P programable logic controller
NX1P programable logic controller built-in EtherNet/IP™ up to 32 connections, EtherCAT® up to 0 synchronous axes
Network switch
Network switch, unmanaged, Fast Ethernet, Number of ports: 5x RJ45, IP30, -10 °C...60 °C
Omron MX2 Series Inverter drive
Specifically created for your application, the Omron's MX2 frequency inverter series was developed to harmonize advanced motor and machine control.
Output Module
Digital DC output module manufactured by Allen-Bradley/Rockwell Automation, typically used in industrial automation systems.
Output module
16-point, solid-state 24V DC sourcing output module designed for use with MicroLogix 1100, 1200, and 1400 programmable logic controllers
Output module
16-point digital sourcing output module used in CompactLogix and MicroLogix 1500 automation systems
PLC CPU Module
A high-performance, discontinued Programmable Logic Controller (PLC) CPU module by Omron.
POINT Guard I/O safety module
8-point digital safety input module from the POINT Guard I/O series.
PROFIBUS DP Master
A PROFIBUS communication module designed for the Allen-Bradley ControlLogix platform.
PROFIBUS OLM/G12 V4.0 Optical Link Module
The Siemens 6GK1503-3CB00 is a PROFIBUS Optical Link Module (OLM/G12 V4.0) designed to convert electrical PROFIBUS signals into optical signals. It allows for reliable, interference-free transmission over extended distances of up to 3 km using glass fiber-optic cables
PROFINET network analyzer PRONETA Basic
PROFINET network analyzer PRONETA Basic
PROFINET network analyzer PRONETA Basic
PROFINET network analyzer PRONETA Basic
PROFINET network analyzer PRONETA Basic
PROFINET network analyzer PRONETA Basic
Power Module
The Siemens 6SL3224-0BE24-0UA0 is a SINAMICS G120 PM240 Power Module
Power Module PM-E
power modules for ET 200S; 24 V DC with diagnostics.
Power Module with integrated filter
6SL3224-0BE31-8AA0 (EAN: 4019169455176 / UPC: 662643434460) SINAMICS PM240-IP20-FSD-A-400V-18,5KW
Power module
6ES7138-4CB11-0AB0. SIMATIC DP, POWER MODULE PM-E FOR ET200S, DC24-48V,. AC24-230V
PowerFlex 525 AC Drive
PowerFlex 525 AC drive designed for industrial motor control, featuring 3-phase, 480V input and a 30 Amp maximum output
Primary-switched TRIO POWER power supply for DIN rail mounting
TRIO POWER is particularly suited to standard machine production, thanks to 1- and 3-phase versions up to 960 W
Programmable Controller
A legacy, ultra-compact Programmable Logic Controller (PLC) from the MELSEC-F series. I
Programmable Logic Controller
Input, Output (I/O) Module DIN Rail 100 ~ 240VAC, 24VDC from Delta Electronics/Industrial Automation.
Programmable Logic Controller
A compact, legacy 14-point Programmable Logic Controller (PLC) from the MELSEC-F series.
Programmable Logic Controller
Programmable Logic Controller (PLC) from the SIMATIC S7-200 SMART series.
Programmable Logic Controller
MicroLogix 1000 Programmable Logic Controller (PLC).
Programmable Logic Controller (PLC)
PLC, FX3U Base Unit AC 100-240 V; 32 inputs DC 24 V; 32 transistor outputs.
Programmable Logic Controller (PLC)
SIMATIC S7-200 series CPU 224XP compact Programmable Logic Controller (PLC) unit.
Programmable Logic Controller (PLC)
A compact Programmable Logic Controller (PLC) main unit from the XGB series by LS Electric (formerly LSIS).
Programmable Logic Controller (PLC)
An ABB AC500-eCo series Programmable Logic Controller (PLC) CPU module.
Programmable Logic Controller (PLC)
A compact Programmable Logic Controller (PLC) base unit.
Programmable Logic Controller (PLC)
A compact Programmable Logic Controller (PLC) processor unit from the Siemens SIMATIC S7-200 series.
Programmable Logic Controller (PLC)
An entry-level compact Programmable Logic Controller (PLC) base unit from the MELSEC-F FX3S series.
Programmable Logic Controller (PLC) CPU
A Basic Programmable Logic Controller (PLC) CPU unit.
Programmable Logic Controller (PLC) CPU module.
A compact Programmable Logic Controller (PLC) CPU module.
Programmable Logic Controllers (PLCs).
A discontinued MELSEC-F series Programmable Logic Controller (PLC) base unit.
Programmable Logic Controllers (PLCs).
A standard 12-slot main base unit (backplane) for the Mitsubishi MELSEC-Q Series of programmable logic controllers (PLCs).
Programmable logic controller
Siemens SIMATIC S7-400 programmable logic controller (PLC) power supply module (PS 407). It is designed to convert standard industrial voltages into the required system voltages, supplying logic power to the PLC rack.
Programmable logic controller
A discontinued legacy Programmable Logic Controller (PLC) CPU from the Siemens S7-200 series.
Programmable logic controller (PLC)
A programmable logic controller (PLC) featuring an integrated display, 24 V AC/DC.
Programmable logic controller (PLC) CPU module
Compact, high-performance programmable logic controller (PLC) CPU module
Pulse I/O module
Omron CPU Pulse I/O module designed for the SYSMAC CJ2M series programmable logic controller
Pulsed DC Controller
a light, compact Pulsed DC Controller designed by Meech Static Eliminators Ltd to power the Series 200 range of static control ionisers
Regenerative Feedback Module
A stabilized infeed and regenerative feedback module.
Relay Contact Outputs
8-point relay contact output unit for the SYSMAC CJ-series programmable logic controllers (PLCs).
Repeater
A Siemens SIMATIC DP RS485 Repeater used for industrial automation.
S7 Micro Memory Card, 8MB
SIMATIC S7, Micro Memory Card for S7-300/C7/ET 200, 3, 3V Nflash, 8 MB
S7 RAM Memory Card
SIMATIC S7, RAM Memory Card for S7-400, long design, 4 Mbytes.
S7-300, Mounting rail
482,6 mm SIMATIC S7-300, mounting rail, length: 482.6 mm
SCALANCE X106-1
Industrial Ethernet (IE) switch designed to provide reliable, plug-and-play network connectivity in harsh automation and manufacturing environments.
SIMATIC DP, IM151-8 PN/DP CPU.
6ES7151-8AB01-0AB0 (EAN: 4025515078760 / UPC: 040892692822) ET 200S, IM151-8 PN/DP CPU, 192 KB
SIMATIC DP, INTERFACE MODULE
The Siemens 6ES7151-1AA02-0AB0 is a discontinued SIMATIC DP interface module (IM151-1 Standard) for the ET 200S distributed I/O system
SIMATIC ET 200SP Base Unit
SIMATIC ET 200SP BaseUnit used in industrial automation systems.
SIMATIC S7-300, CPU 315-2DP CPU
SIMATIC S7-300, CPU 315-2DP CPU WITH MPI INTERFACE INTEGRATED 24 V DC POWER SUPPLY
SIMATIC S7-400, digital input SM 421
SIMATIC S7-400, digital input SM 421
SIMATIC S7-400, digital output SM 422, isolated 32 DO; 24 V DC, 0.5 A
SIMATIC S7-400, digital output SM 422, isolated 32 DO; 24 V DC, 0.5 A
SIMATIC USB/PPI Multi-Master programming cable
Multi-Master programming cable used to connect a PC to S7-200 series PLCs
SIMOVERT MASTERDRIVES
SIMOVERT MASTERDRIVES VECTOR CONTROL CONVERTER CHASSIS UNIT, IP00 3 380-480V AC, 50/60HZ, 370 A NOM. POWER RATINGS: 200KW DOCUMENTATION ON CD
SIMOVERT MASTERDRIVES
SIMOVERT MASTERDRIVES VECTOR CONTROL CONVERTER UNIT
SIMOVERT MASTERDRIVES
The Siemens 6SE7016-1TA61-Z is a SIMOVERT MASTERDRIVES Vector Control Inverter
SIMOVERT MASTERDRIVES
SIMOVERT MASTERDRIVES VECTOR CONTROL INVERTER COMPACT UNIT
SIMOVERT MASTERDRIVES VECTOR CONTROL CONVERTER
The Siemens 6SE7033-2EG60-Z is a discontinued SIMOVERT MASTERDRIVES Vector Control Inverter chassis unit. The -Z implies it includes customized options: www.industry-mall.net +3 G91: Includes a PROFIBUS CBP2 communication module (inserted at Slot A). K80: Features a "Safe Stop" function to prevent unexpected startup
SINAMICS CONVERTER 3AC 3,0kW UNFLT.
Designed for high-performance three-phase industrial drive and servo applications
SINAMICS G120 PM240 Power Module
The Siemens 6SL3224-0BE33-7AA0 (also known as the SINAMICS G120 PM240 Power Module)
SINAMICS G120C Compact Inverter
A compact, unfiltered frequency converter from the SINAMICS G120C series, designed for controlling 3-phase AC motors
SINAMICS G120C PN 1,1KW UNFIL
The Siemens 6SL3210-1KE13-2UF2 is a compact and highly reliable frequency inverter from the SINAMICS G120C series. Designed for industrial automation, it provides precise motor control and is equipped with advanced safety features and fieldbus communication capabilities
SINAMICS S120 DOUBLE MOMO 3A/3A INT
SINAMICS S120 Double Motor Module input: 600 V DC output: 400 V 3 AC, 3 A/3 A type of construction
SIRIUS soft starter
Compact, 2-phase controlled SIRIUS 3RW30 soft starter designed for the smooth starting and stopping of 3-phase asynchronous motors
SITOP Smart 120W Stabilized Power Supply
is a Siemens SITOP Smart 120W Stabilized Power Supply. It is Industrial, DIN-rail mountable power module that steps down standard AC voltages into a regulated output at
SIWAREX FTA Weighing module
Approved for use in the PCS 7 environment as an electronic weighing system.
SMART Battery Board
SIMATIC S7-200 SMART, battery board supported real time clock.
SMART CPU
Siemens SIMATIC DP RS485 repeater used to connect and extend PROFIBUS/MPI bus systems.
STANDARD interface module
SIMATIC DP Interface Module (IM 151-1 Standard) used to connect a distributed I/O station to a PROFIBUS DP network
SYSMAC NJ5 CPU Machine Automation Controller CPU unit
The NJ501-1300 is a high-performance Machine Automation Controller (MAC) CPU Unit manufactured by OMRON Industrial Automation. It seamlessly integrates sequence, logic, and motion control into a single scalable platform, primarily built for advanced industrial automation and robotics. Key SpecificationsController Functionality: Motion control, Sequence control, and OPC-UA.Motion Axes: Supports up to 16 synchronous axes (including virtual axes), making it highly capable for complex, high-speed multi-axis motion.Memory: 20 MB program memory and 6 MB variables memory.Cycle Time: Primary task cycle time is 0.5 ms
Safety Module
SIMATIC DP, Electronic Module for ET 200SP, F-DI 8x24VDC HF.
Servo Driver
High-performance, 1.5 kW AC servo drive. Part of the ASDA-A2 series.
Siemens Control Unit
3-phase, 400V drive rated for 5.5 kW (High Overload) or 7.5 kW (Low Overload)
Siemens SIMATIC DP PROFIBUS Bus Connector
It is an RS485 connector used for connecting PROFIBUS nodes (up to) with a cable outlet, FastConnect technology, and an integrated programming device (PG) socket
Siemens SINAMICS S120 Power Module
Siemens SINAMICS S120 Power Module (PM340) used in industrial motion control and drive systems
Slot Base Unit
Refers to the MELSEC-Q Series 8-Slot Base Unit (or main base rack).
Stepping Motor Driver
The MA860H can drive any 2-pahse and 4-pahse hybrid stepping motors
Temperature and humidity controller
Temperature and humidity controller
The SICK DT500-A311 (Part No. 1040475) is a heavy-duty, high-precision long-range laser distance senso
The SICK DT500-A311 (Part No. 1040475) is a heavy-duty, long-range laser distance sensor that utilizes precise time-of-flight technology to measure distances to natural objects. It delivers highly accurate, repeatable measurement data, making it ideal for industrial automation, positioning, and level monitoring applications.
Thermocouple Temperature Input Module
4-channel thermocouple temperature input module for the LS Electric (formerly LG) XGB series of (PLCs).
Transceiver Module
Industrial Gigabit Ethernet fiber optic transceiver (SFP module) designed by Hirschmann.
Transistor Output Module
A digital transistor output module for the MELSEC-Q series Programmable Logic Controller (PLC) systems.
Transistor Outputs
A 32-point digital transistor output module designed for use with Omron’s CJ1 and CJ2 series (PLCs).
Universal Model CPU
A universal model CPU module for the MELSEC-Q Series programmable logic controllers (PLCs) by Mitsubishi Electric
Unmanaged Ethernet switch
Unmanaged Ethernet switch with 7 10/100BaseT(X) ports, 1 100BaseFX multi-mode port with ST connectors, -10 to 60°C operating temperature
Variable Speed Drive
Entry-level variable speed drive used to control 3-phase asynchronous motors.
non-rechargeable lithium backup battery assembly manufactured by Rockwell Automation
ControlLogix L6X Ser B ONLY Battery Assy
output module
Siemens SIMATIC ET 200SP digital output module (DQ 16x 24V DC/0.5A Standard).
power supply module
Power supply module X80 - 100..240 V AC - for severe environments
single-channel SmartPro transmitter
The 3-9900-1 (by GF Signet) is a field-mount, single-channel SmartPro transmitter
Siemens SIMATIC S7-1200 PLC
Compact PLC for small to medium automation tasks with integrated I/O
We can source any model from our extensive supplier network. Contact us with your requirements.
