Actuator Cable Assembly
A single-ended sensor and actuator cable assembly
Select from our range of products from different brands
Actuator Cable Assembly
A single-ended sensor and actuator cable assembly
BUS CONNECTOR FOR PROFIBUS
A standard RS-485 bus connector used to link PROFIBUS networks.
Connector (plug)
An electrical connector plug used primarily for pressure transmitters and sensors (such as the Danfoss AKS and MBS series).
DC Micro (M12) Sensor and Actuator Cord Set
An 8-pin, straight female DC Micro (M12) industrial sensor/actuator cable.
Data Connector.
An Industrial Ethernet Fast Connect RJ45 Plug 180 data connector.
Female (socket)
3-pin, right-angle M8-to-free-end sensor connection cable.
Female Socket Sensor Cable
An Omron water-resistant sensor and automation connector cable.
Female Wirable Socket
A field-attachable 4-pin M12 female connector (wirable socket).
Front Connector
SIMATIC S7-300, Front connector for signal modules with screw contacts, 20-pole.
PROFIBUS connector
PROFIBUS FC RS 485 plug 180 PROFIBU Connector with Fast Connect connection plug and axial cable outlet for Industry PC, SIMATIC OP, OLM, Transfer rate: 12 Mbit/s
Robotic Extension
A 5-meter circular extension cordset and robotic cable used in industrial automation.
Screw-Clamp Terminal
I/O terminal base unit used to provide secure physical and electrical field wiring connections for FLEX I/O modules.
Sensor/Actuator
A 5-meter sensor/actuator connecting cable used in industrial automation.
Single-ended female sensor-actuator
M12 socket connection and a 2-meter PVC cable with a bare open wire end.
Universal Terminal Modules
A pack of five universal Terminal Modules (model TM-E15S26-A1) for the SIMATIC ET 200S distributed I/O system.
power cable pre-assembled 4x 1.5+(2x1.5) C
power cable pre-assembled 4x 1.5+(2x1.5) C
universal terminal modules
The Siemens 6ES7193-4CA50-0AA0 is a pack of five Universal Terminal Modules (TM-E15C26-A1) designed for the SIMATIC DP ET 200S distributed I/O system. They provide secure, compact electrical connections and field wiring for 15 mm wide electronic modules
(AS-i) Sensor
An AS-Interface (AS-i) sensor input module used in industrial automation.
Analog output module
A modular analog output module from the X20 automation series, designed for industrial control systems
Automation Cable
4-pin, M12 straight socket (female) sensor cord set with 10 meters of PVC, fire-retardant robotic cable .
Bus Connector
PROFIBUS bus connector (part of the SIMATIC NET series) featuring a 180° (axial) cable outlet.
Bus Connector f. PROFIBUS, wit PG Socket
Bus Connector f. PROFIBUS, wit PG Socket
Connecting Cable
A connecting cable with socket (or female cordset) manufactured by ifm electronic.
Connecting cable
A 5-meter universal Festo connecting cable with an angled 3-pin M8 socket.
Connecting cable with a socket
An industrial connecting cable with an angled 1/2" socket socket designed for factory automation and sensor power .
Connection Cable
A straight, single-ended M12 4-pin female to free-end actuator and sensor connection cable.
Connection Cable and Socket
An industrial-grade M12 sensor connection cable and socket.
Connection cord set for PC terminal
Connection cord set for PC terminal - for Premium / Quantum - 2 m
Connection cord set for PC terminal
Connection cord set for PC terminal - for Atrium / Premium - 0.4 m
Connector Female
A heavy-duty rectangular connector female contact insert (4+PE pole configuration, 10A, 250V/400V) .
Connector Male
A heavy-duty rectangular connector male contact insert (4 positions plus ground, 250V, 10A) with a screw termination style.
Connector cable
The VW3M8301R150 is a SinCos Hiperface encoder cable manufactured by Schneider Electric (part of their motion control and servo drive accessories). It is used to connect servo motors to servo drives
Connector for proximity sensor
The V1-G-BK by Pepperl+Fuchs is a field-attachable, straight female connector designed to customize sensor-actuator cables in industrial environments. It features an M12 connection, A-coding, 4 pins, and allows for screw-terminal connections without special tooling
DIN rail end clip
An industrial DIN rail end clip (end stopper) manufactured by IDEC.
Digital input module
industrial digital input module used in the B&R X20 PLC system
Ethernet device servers USR-N510
1-port RS232/422/485 Ethernet device servers USR-N510
Extension Cable
An Omron Automation double-ended extension cable used for safety light curtains and sensors.
Extension Cord
10-meter sensor/actuator extension cable featuring an M12 Smart click straight socket (female) and(male).
Female Soldering Connector
A PLC connection plug with a 45-degree (oblique) cable outlet and soldering-type terminals.
Female connector
A heavy-duty female contact insert designed for industrial plug-in connectors.
Fiber-Optic Cable
A 5-meter (16.4 ft) SERCOS interface plastic fiber-optic cable.
Front Connector, 40pin,Screw Cont.
Front connector for signal mocules with screw contacts, 40-pin
Front connector with a push-in design
Siemens SIMATIC S7-1500 Front Connector featuring a 40-pole push-in design
GOT adapter cable with a terminal block
0.5-meter RS-485/RS-422 adapter cable and conversion cord set.
Interface module
Communication interface module for X20 series PLCs, featuring two electrically isolated CAN bus interfaces
MOTION-CONNECT 500 Signal Cable.
A pre-assembled MOTION-CONNECT 500 signal cable.
PROFIBUS Bus Connector
A SIMATIC DP bus connector designed for PROFIBUS networks
PROFIBUS Connector
A standard PROFIBUS bus connector used in industrial automation systems (SIMATIC S7).
PROFIBUS Connector
A PROFIBUS bus connector designed for connecting PROFIBUS nodes to an RS 485 network.
PROFIBUS Connector
SIMATIC DP bus connector used for connecting devices in a PROFIBUS network.
PROFIBUS DP Bus Connector
A discontinued Siemens SIMATIC PROFIBUS DP bus connector.
PROFIBUS connector
Bus Connector f. PROFIBUS, 35 Degree SIMATIC DP, Connection plug for PROFIBUS up to 12 Mbit/s 35 degree cable outlet,
Power Connector Male Insert
Heavy Duty Industrial Power Connector Male Insert with 8 positions and a crimp termination style.
Power Connectors
A power connector for the SINAMICS S120 industrial drive system.
Power Connectors ASD
5-meter power cable designed specifically for the Delta ASDA-A2 series of AC servo systems.
Profibus Adapter
Integrate industrial ABB motor drives and control systems into PROFIBUS networks
Programming Cable.
The CQM1-CIF02 is a dedicated RS-232 serial programming cable manufactured by Omron
Programming cable
Programming cable used to connect a PC to Mitsubishi FX Series PLCs
Rectangular Connector
A heavy-duty industrial connector contact insert .
SIMATIC DP,BUS CONNECTOR
The Siemens 6ES7972-0BB51-0XA0 is a SIMATIC DP Bus Connector used for PROFIBUS industrial networks
Sensor Cable
2-meter, 4-core sensor and actuator cable used for industrial automation .
Sensor Connection Cable
4-pole, straight M12 sensor cordset featuring a 5-meter PUR cable.
SAC-3P-M12MR/3,0-PUR/M 8FS 1668904
Sensor/Actuator Cable
A 3-position sensor/actuator cable. It is used to connect industrial sensors and actuators to control systems.
SAC-3P-10,0-PUR/M 8FS (1694101)
Sensor/actuator Cable
A 3-position sensor/actuator cable.
Sensor/actuator cable
Primarily refers to a specific industrial sensor/actuator cable.
Servo Drive Safety Cable
Omron Accurax G5 Series servo drives to connect safely with controllers.
Servo Encoder Cable
A 10-meter high-flexibility servo encoder cable manufactured by Omron Automation.
Servo Motor Power Cable
A 30-meter, 16 AWG servo motor power cable from the Kinetix/MP-Series.
Single Motor Cable
A Kinetix single-cable for servomotors. It is a 4-meter, non-flex, 18 AWG cable that handles single-motor power and feedback
Terminal Block
A multi-tier modular terminal block with a screw connection.
Terminal Block Converter Module
A terminal block converter module designed by Mitsubishi Electric.
Terminal Module
Terminal module for the SIMATIC ET 200S distributed I/O system.
Terminal Module
A SIMATIC DP Terminal Module (TM-E30C46-A1) used in the ET 200S distributed I/O system.
Terminal Module
SIMATIC DP terminal module (TM-E15S24-01) for the ET 200S distributed I/O system.
We can source any model from our extensive supplier network. Contact us with your requirements.
