SIEMENS
3WT9854-1JK00
Undervoltage Release Coil
An undervoltage release (trip coil) belonging to the SENTRON series.
Browse our complete range of professional products
SIEMENS
Undervoltage Release Coil
An undervoltage release (trip coil) belonging to the SENTRON series.
SIEMENS
3-phase IEC rated contactor used for the control of electric motors.
3-phase IEC rated contactor used for the control of electric motors.
SIEMENS
ANALOG OUTPUT SM 332
OPTICALLY ISOLATED, 4 AO, U/I;. DIAGNOSTICS;. RESOLUTION 11/12 BITS, 20 PIN,. REMOVE/INSERT W. ACTIVE, BACKPLANE BUS
SIEMENS
Air Circuit Breaker (ACB)
A Siemens Sentron fixed-mounted air circuit breaker (3-pole, size II, IEC 1600A) with an ETU 15 LI overcurrent release.
SIEMENS
Analog I/O module
SIMATIC S7-200 series analog input/output expansion module (EM 235).
SIEMENS
Analog Input Module
High-speed, 2-channel analog input module designed for the Siemens SIMATIC ET 200S distributed I/O system.
SIEMENS
Analog Input Module
A versatile, optically isolated analog input card for the Siemens S7-300 Programmable Logic Controller (PLC) system.
SIEMENS
Analog input module
An analog input module for the Siemens SIMATIC S7-1500 system.
SIEMENS
Auxiliary Contact Block
Laterally mounted auxiliary switch block designed for the SIRIUS 3RV1 line of motor starter protectors and circuit breakers.
SIEMENS
Auxiliary Contact Block
A front-side auxiliary switch block from the SIRIUS series.
SIEMENS
Auxiliary Contact Block
Auxiliary contact block used with 22 mm and 30 mm industrial control switches, pushbuttons, and pilot devices.
SIEMENS
Auxiliary Contact Block
An actuator and indicator component acting as a 2-pole contact block.
SIEMENS
Auxiliary Switch
Auxiliary switch block featuring 1 Normally Open (1 NO) and 1 Normally Closed (1 NC) instantaneous contacts.
SIEMENS
Auxiliary contactor relay
A Siemens auxiliary contactor relay (model 3TH4, size 0) featuring 10 normally open (10 NO) contacts .
SIEMENS
Auxiliary switch block
An auxiliary switch block manufactured by Siemens for their SIRIUS line of industrial control devices.
SIEMENS
BUS CONNECTOR FOR PROFIBUS
A standard RS-485 bus connector used to link PROFIBUS networks.
SIEMENS
Backup battery
A 3.6V / 2.3Ah lithium backup battery used for SIMATIC S7-400 programmable logic controllers (PLCs).
SIEMENS
Braking Module
SINAMICS Braking Module compact Input: DC600V Output: Pdb/Pmax 5/100kW.
SIEMENS
COMPACT CPU
SIMATIC S7-300 compact CPU (CPU 313C-2 DP) used in industrial automation
SIEMENS
CONTROL UNIT
A SINAMICS G120 Control Unit (Model: CU240E-2 DP) designed to control and monitor modular inverter drives.
SIEMENS
CPU
A Siemens central processing unit (CPU 1517-3 PN/DP) from the SIMATIC S7-1500 automation series.
SIEMENS
CPU 312
CPU 312 Central processing unit with MPI, Integr. power supply 24 V DC, Work memory 32 KB, Micro Memory Card required.
SIEMENS
Central Processing Unit
A legacy SIMATIC S7-300 CPU 314 Central Processing Unit designed for industrial automation control systems.
SIEMENS
Central processing unit
(CPU 416-2) from the SIMATIC S7-400 series. Designed for data-intensive, complex industrial automation tasks.
SIEMENS
Central processing unit
A spare part for the SIMATIC S7-300 compact central processing unit .
SIEMENS
Change-over switch disconnector
An industrial motorized change-over switch disconnector .
SIEMENS
Circuit Breaker
SIRIUS series motor protection circuit breaker (MPCB) designed to protect 3-phase motors against overloads, short circuits.
SIEMENS
Circuit Breaker
A Siemens SENTRON miniature circuit breaker (MCB) used for industrial circuit protection and power distribution control.
SIEMENS
Circuit breaker
Four-pole miniature circuit breaker (MCB) from the SENTRON 5SY series.
SIEMENS
Circuit breaker frame size S00 for motor protection
Circuit breaker frame size S00 for motor protection
SIEMENS
Circuit breaker size S0 for motor protection
Circuit breaker size S0 for motor protection
SIEMENS
Circuit breaker size S0 for motor protection
Circuit breaker size S0 for motor protection
SIEMENS
Communications Module
A communication module used to connect a SIMATIC S7-1200 programmable logic controller to a PROFIBUS network .
SIEMENS
Communications Processor
(CP 343-1 Advanced) designed to connect SIMATIC S7-300 PLCs to Industrial Ethernet and PROFINET networks.
SIEMENS
Communications Processor CP
A Communications Processor CP 443-5 Extended.
SIEMENS
Connection plug
SIMATIC DP PROFIBUS bus connector designed to connect PROFIBUS nodes or stations to a PROFIBUS communication cable.
SIEMENS
Contactor Relay
A Siemens / Furnas Class 45 Definite Purpose AC Magnetic Contactor.
SIEMENS
DOUBLE MOTOR MODULE
SINAMICS S120 Double Motor Module input: 600 V DC output: 400
SIEMENS
DP operator interface panel
SIMATIC TP 177B 6" DP operator interface panel from the Siemens SIMATIC HMI family
SIEMENS
DP/DP Coupler Coupling Module
It is a hardware coupling module used to connect two independent PROFIBUS DP networks,
SIEMENS
DRIVE-CLiQ signal cable
SINAMICS DRIVE-CLIQ CABLE IP20/IP20 LENGTH: 1.20 M.
SIEMENS
Data Connector.
An Industrial Ethernet Fast Connect RJ45 Plug 180 data connector.
SIEMENS
Decoder Module
A technology/position decoder module for the SIMATIC S7-300 PLC family.
SIEMENS
Digital I/O Expansion Module
Siemens SIMATIC S7-200 CN digital expansion module (EM 223).
SIEMENS
Digital Input Expansion Module
This module is a digital input expansion module for the SIMATIC S7-300 series of Programmable Logic Controllers (PLCs).
SIEMENS
Digital Input Module
SIMATIC S7-1200, Digital input SM 1221, 16 DI, 24 V DC, Sink/Source.
SIEMENS
Digital Output Module
A standard expansion module designed for the Siemens SIMATIC S7-300 Programmable Logic Controller (PLC) series.
SIEMENS
Digital Output Module
SIMATIC S7-300 Digital Output Module (SM 322) 32 isolated digital outputs
SIEMENS
Digital Output Module
A standard (ST) digital output module for the Siemens SIMATIC S7-1500 series.
Contact us for competitive pricing on all products